This manual covers installation, operation, maintenance, and troubleshooting for the GCC J5 series vinyl cutting machines.
The GCC J5 Series is a line of electronic image engraving and edge-cutting machines designed for single-sheet and roll media. The series includes models with varying maximum cut widths ranging from 610mm to 1830mm, featuring high-speed cutting capabilities up to 1530 mm/sec. This manual is written in Chinese.
| Max Cut Length | 50m (164ft) |
|---|---|
| Min Feed Width | 50mm to 300mm depending on model |
| Max Cutting Speed | 1530 mm/sec (diagonal) |
| Cutting Pressure | 0~600 g |
| Power Supply | AC 100-240V, 50~60 Hz |
| Transmission Interfaces | USB 2.0, RS-232C, Network Port |
When moving the machine, you must firmly support it from the bottom and avoid gripping the recessed areas on both sides.
Ensure that the paper feed roller is located above the paper feed cylinder, aligning with the 'white mark' on the guide rail.
The machine should be operated in an environment with a temperature between 15°C and 30°C (60°F~86°F) and humidity between 25% and 75%.