Gamma System catalog of safety mats, safety edges and safety bumpers, including ATEX versions, control units and minimum distance formulas.
This Gamma System safety devices catalog opens with an index covering safety mats, ATEX safety mats, safety edges, safety bumpers, ATEX safety bumpers, control units, a wireless safety system for conductive edges, an ATEX safety barrier, proximity switches and photoelectric sensors, and safety light curtains.
The safety mat pages describe a pressure-sensitive device: the presence of one or more persons over 35 kg closes a contact inside the sensor, and the control unit processes the change of state and emits a machine stop signal. The mat is supplied with an embossed black PVC coating, can be divided into two sensitive zones on separate circuits, and has maximum single-mat dimensions of 2000x1500 mm. Cable, aluminium profile (type A slope / type B 90°) and ordering-code details (GSTS = Gamma System Safety Mat, GSTSPP...) are given, together with the general method for calculating minimum distance from the hazardous area, S = (1600 mm/s x T) + (1200 mm - 0.4 H), and the floor-mounted case H = 0, S = (1600 mm/s x T) + 1200 mm.
| Maximum dimensions of a single safety mat | 2000 x 1500 mm |
|---|---|
| Activation weight | over 35 kg |
| Standard outlet cable | 4-pole FROR 300/500, 4x0.35 mm², standard length 3 m |
| Cable outlet position | 100 mm from the right edge |
| Standard coating | embossed black PVC |
| Minimum distance formula (general) | S = (1600 mm/s x T) + (1200 mm - 0.4 H) |
| Minimum distance formula (floor-mounted, H = 0) | S = (1600 mm/s x T) + 1200 mm |
| Constant K (approach speed) | 1600 mm/s |
It uses an electro-pressure sensible element; the presence of one or more persons over 35 kg closes a contact inside the sensor, and the control unit emits a machine stop signal.
With H = 0 the minimum distance is S = (1600 mm/s x T) + 1200 mm, where T is the global response time in seconds.
A single mat can measure up to 2000x1500 mm; larger zones are formed by placing several mats side by side.
Yes, the mat can be divided into two sensitive zones controlled by two separate circuits; if both zones are activated at the same time the installation shuts down.