FURUNO FS-1562-15/25 MF/HF SSB Radiotelephone User Manual

User manual for the FURUNO FS-1562-15/25 MF/HF SSB marine radiotelephone, covering operation, 2182 kHz distress calling, maintenance and troubleshooting.


FURUNO FS-1562-15/25 MF/HF SSB Radiotelephone User Manual - cover page
Brand
Furuno
Category
Communications equipment
Document type
User Manual
Language
English
Pages
58
File format
PDF
File size
531 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
5110812CFC072F8A3191E2CAA8663495

About this manual

This is the operator's manual for the FURUNO FS-1562 MF/HF SSB Radiotelephone, an all-purpose radiotelephone system designed for marine mobile communication in the 1.6 to 27.5 MHz frequency range. All ITU channels are preprogrammed, and TX/RX frequencies can be stored in an E2PROM with a capacity of 200 frequency pairs. Two versions are described: the FS-1562-15 (150 Wpep) and the FS-1562-25 (250 Wpep).

The manual opens with safety instructions and product specifications, then covers system set-up, the front panel of the transceiver unit, selecting frequency, transmitting, the distress call on 2182 kHz, DSC distress calling, receiving, frequency scan and sweep. Later chapters describe optional devices (telex communication, intercom, remote station), changing system settings, weekly checks and diagnostic tests, the troubleshooting list, error indications and fuse replacement, followed by an appendix with the declaration of conformity to type.

What's inside

  • System Set-up
  • Front View of Transceiver Unit
  • Selecting Frequency
  • Transmitting
  • Distress Call on 2182 kHz
  • DSC Distress Calling
  • Frequency Scan
  • Frequency Sweep
  • Telex Communication
  • Intercom

Specifications

Frequency Range1.6 to 27.5 MHz (transmit), 0.1 to 30 MHz (receive)
Frequency ResolutionTransmit: 100 Hz; Receive: 10 Hz
Output PowerFS-1562-15: 150 W pep; FS-1562-25: 250 W pep (J3E/H3E, J2B)
Power Supply24 VDC +30%, -10%; a rectifier unit is required for AC
Frequency Error±10 Hz (both transmitter and receiver)
Antenna Required7 to 30 meters wire or whip
Transceiver Unit Dimensions and Weight108 mm(W) x 258 mm(H) x 300 mm(D), 6.5 kg
Antenna Coupler Unit Dimensions and Weight297 mm(W) x 390 mm(H) x 90 mm(D), 3.1 kg approx.

Frequently asked questions

What is the difference between the FS-1562-15 and the FS-1562-25?

The FS-1562-15 has an output power of 150 Wpep and the FS-1562-25 has 250 Wpep.

How is the 2182 kHz distress frequency selected?

Pressing the 2182 key immediately selects 2182 kHz, automatically at FULL power.

What battery capacity does the radiotelephone need?

More than 120 AH for the 150 W set and 200 AH for the 250 W set.

What should I do if water leaks into the equipment?

Turn off the power immediately, because continued use can cause fire or electrical shock.

Download PDF (531 KB)

More Furuno Manuals


View all Furuno manuals →