Product leaflet for the Fujikura 70R+ Fusion Splicer, featuring Bluetooth connectivity, automated wind protection, and support for up to 12 fibers.
The Fujikura 70R+ Fusion Splicer is a precision device designed for splicing ribbon fiber up to 12 fibers, including single fibers. It incorporates ruggedized features such as a mirror-less optical system and a severe-impact resistant monitor. The device includes automated and programmable features like a wind protector and a tube heater to increase splicing efficiency.
| Applicable Fibers | Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) |
|---|---|
| Fiber Count | Single, 2, 4, 5, 6, 8, 10, 12 |
| Cladding Diameter | 125 µm |
| Coating Diameter | Ribbon: 0.25 mm to 0.4 mm, Single: 250 µm and 900 µm |
| Fiber Cleave Length | 10 mm |
| Typical Average Splice Loss | 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS |
| Splicing Time | Typical 15 seconds with standard single-mode fiber |
| Splicing Modes | 100 preset and user programmable modes |
| Storage of Splice Result | Last 2000 splice results stored in the internal memory |
| Magnification | 35X to 90X |
| Operating Condition | 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C |
| Tube Heating Time | Typical 40 seconds with FP-5 sleeve |
| Protection Sleeve Length | 60 mm, 40 mm, Micro |
| Heat Cycles with Battery | Typical 110 cycles with power save functions activated |
| Electrode Life | 1,500 Arc Discharges |
| Power Supply | Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery |
| Dimensions | 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches) |
| Weight | 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery |
The typical splicing time is 15 seconds with standard single-mode fiber.
The internal memory can store the last 2000 splice results.
The typical average splice loss is 0.05 dB with single-mode fiber.
The typical tube heating time is 40 seconds with an FP-5 sleeve.