The Founder Technology 美仑3400E 1010 workstation user manual provides safety guidelines, quick setup, hardware installation and configuration instructions.
This manual introduces safety precautions and handling instructions for the 美仑3400E 1010 workstation, including warnings, environmental limits and proper power connections. It also explains how to unpack, check accessories and prepare the work environment before powering the system.
The guide then walks through quick assembly, hardware installation (CPU, memory, storage, PCI/PCI‑Express cards), firmware configuration, operating‑system installation and graphics‑card setup. Troubleshooting tips and a FAQ section help resolve common boot‑disk and hard‑disk issues. This manual is written in Chinese.
| Height | 465 mm |
|---|---|
| Width | 198 mm |
| Depth | 425 mm |
| Power Voltage | 220 V |
| Frequency | 50 Hz |
| Operating Temperature | 10 °C – 35 °C |
| Maximum Power‑Cable Length | 4.5 m |
Check that the CD is bootable, the CD‑ROM power and signal cables are correctly connected, the drive is properly configured, the IDE controller is enabled in BIOS, and the CD‑ROM is set as the first boot device.
Verify the hard‑disk power and signal cables, ensure any RAID card has a correctly created array, clear any existing MBR if needed, and if the problem persists, use appropriate disk tools to zero or low‑level format the drive.