Flexco X6194 electric belt cutter blade replacement instructions with safety warnings and step-by-step removal and reassembly of the blade.
This single-page instruction sheet from Flexco explains how to change the blade on the X6194 electric belt cutter. It walks through eight numbered steps: unplugging the drill, loosening the rear bracket bolt, removing the bracket support bolt and nut, rotating the bracket away from the blade, removing the blade mounting bolt and shaft, fitting the new blade and spacers, rotating the bracket back into place, and retightening the bolts.
Safety warnings appear alongside the steps: do not touch the blade, wear cut-resistant gloves and safety glasses, unplug the tool before starting, and let only authorized and trained technicians operate the cutter. The sheet also states that the blade must not be sharpened, and that the cutter should be tested after the blade is replaced. Contact details for Flexco in Shanghai and the reorder number X6194 are printed on the page. This manual is written in Chinese.
| Model | X6194 |
|---|---|
| Reorder number | X6194 |
Unplug the drill from the power source first, then follow all the steps in the instructions.
Cut-resistant safety gloves and safety glasses must be worn, because the blade is sharp.
No. The instructions say not to try to sharpen the blade because it affects complete cutting of the belt.
Only authorized and trained technicians may operate the cutter.