Fishman Prefix Series Preamplifier Installation Guide

Installation guide for Fishman Prefix Series preamplifier with wiring, mounting, and clearance requirements for acoustic guitars.


Fishman Prefix Series Preamplifier Installation Guide - cover page
Brand
Fishman®
Document type
Installation Guide
Language
English
Pages
2
File format
PDF
File size
230 KB
Published
04 November, 2026
Updated
04 November, 2026
MD5 checksum
125A66F69D9F50D10F439F7BFA72EEE0

About this manual

This guide details the installation of the Fishman Prefix Series preamplifier in acoustic guitars. It includes requirements for saddle slot dimensions, clearance between braces, and endpin hole modifications. Installation steps cover cutting out the preamp cavity, drilling mounting holes, wiring the output cable, and mounting the preamp using provided screws and backing plates. Specific wiring instructions are provided for different models including Premium Blend, Onboard Aura, and Prefix Plus-T.

What's inside

  • Requirements
  • Installation Preliminary
  • Cut out the preamp cavity
  • Output cable / endpin jack wiring
  • Mount the preamp
  • Complete the installation

Specifications

Minimum saddle slot length2.775” (70.4mm)
Maximum E to E spacing at saddle2.5” (63.5mm)
Clearance between top and back bracesMinimum 2 ¼” (57.15mm)
Endpin hole size15⁄32” (11.9mm)
Mounting hole diameter#45 drill (.082” / 2.08mm)

Frequently asked questions

What is the minimum saddle slot length required for installation?

Minimum saddle slot length: 2.775” (70.4mm).

What clearance is needed between the top and back braces?

At least 2 ¼” (57.15mm) clearance is required between the top and back braces.

How should the endpin hole be modified?

Widen the endpin hole to 15⁄32” (11.9mm) to accommodate the endpin jack.

What is the recommended location for mounting the preamp?

The best location is often at the upper bout, just above the instrument’s waist and well below the shoulder.

Download PDF (230 KB)

More Fishman® Manuals


View all Fishman® manuals →