Fishman Onboard Aura ™ allows users to record and perform acoustic guitars with excellent sound quality. Onboard Aura ™ is a completely customized sound image algorithm that can create a sound that matches your acoustic guitar infinitely, ensuring that your acoustic guitar sound sounds the same as it does without amplification, and the sound is louder.
The Fishman Onboard Aura is a portable preamp system designed to transform the sound of an acoustic guitar’s pickup into a studio-quality, microphone-like tone. It uses advanced Acoustic Sound Image algorithms to emulate the sound of different microphones placed in ideal recording environments. The unit features three-band EQ, an onboard tuner with mute, a phase switch, and an automatic anti-feedback circuit. It’s designed for musicians who want professional-grade sound without the need for external microphones. Setup is intuitive, with quick-start instructions and detailed controls for tone shaping and feedback management.
| Typical in-use current consumption @ 9VDC | 13.5mA |
|---|---|
| Typical 9V alkaline battery life (in-use) | 37 hrs |
| Typical sleep mode current consumption @ 9VDC | 6.5mA |
| Typical 9V alkaline battery life (sleep mode) | 77 hrs |
| Nominal output impedance | 1k Ω |
| Recommended load impedance | 10k and up |
| Adjustable gain range | -5dB to +7dB |
| Maximum output level (onset of clipping) | +3.8 dBV |
| Baseline noise (A-weighted, tone controls flat) | Pickup signal path: -82 dBV; Digital image signal path: -77 dBV |
| Dynamic Range | 85.8 dB (Referenced to onset of clipping, A-weighted) |
| Frequency response | 40Hz – 20 kHz (Tone controls flat, -3dB relative to 1kHz, 100k Ω load) |
| Bass control: Frequency Boost and Cut Range | 40 Hz 12 dB, 100 Hz 9 dB |
| Midrange control: Frequency Boost and Cut Range | 1 kHz 12 dB |
| Treble control: Frequency Boost and Cut Range | 10 kHz 10 dB, 15 kHz 12 dB |
| Anti-Feedback: Cut depth | 13.5 dB |
| Anti-Feedback: Bandwidth | 0.25 Octave (-3dB relative to nominal gain) |
| Default center Frequency | 100Hz (prior to calibration) |
| Global phase switch: In position | (+) positive polarity |
| Global phase switch: Out position | (-) inverse polarity |
It’s a technology that uses advanced algorithms to adjust the pickup’s ‘view’ of the guitar to match how a microphone captures sound in a studio environment.
Plug it into your amp or PA with a 1/4 inch cable, set the Play/Edit switch to ‘Play’, press the Tuner button to turn it on, and use the Image Select knob to choose a Sound Image.
It turns the tuner on/off, mutes the output, and calibrates to A = 440.