Instruction manual for Exel MG400 and AG400 powder coating spray guns and the GCU400 gun control unit, covering safety, assembly and specifications.
The 400 Series instruction manual from Exel Industrial UK Ltd. covers the MG400 manual powder coating spray gun, the AG400 automatic powder coating spray gun and the GCU400 gun control unit. It describes the Total Energy Control (TEC) system, which adjusts current and voltage after the maximum energy level has been set.
The document includes safety cautions, an EC Declaration of Conformity, descriptions of the guns and control unit, electrical and pneumatic specifications, weights and dimensions, and assembly instructions.
| Input voltage | 100-240 V, 50/60 Hz, single phase |
|---|---|
| Power consumption at full load | 45 VA |
| Electrostatic output voltage | 10-85 kV negative |
| Electrostatic output current | 0-50 uA (mode 1); 0-100 uA (mode 2) |
| Input air pressure | 7.0 bar (100 psi) maximum |
| GCU400 nett weight | 8.0 kg |
| GCU400 nett dimensions | 280 mm x 280 mm x 120 mm |
| MG400 weight | 0.495 kg |
| MG400 dimensions | 330 mm x 200 mm x 45 mm |
The GCU400 provides the control functions for Exel 400 Series manual and automatic powder coating spray guns.
The spray guns have a maximum output voltage of 85 kV.
After the maximum energy level is set, TEC automatically adjusts both current and voltage to help the operator gain optimum spraying results.
The workpiece must have a resistance to earth of no greater than 1 Mohm, and this should be checked regularly.