Service manual for the EV EV630P/N Series servo system, covering fault alarms, fault phenomena, wiring checks, and appendices for on-site troubleshooting.
The EV630P/N Series Common Fault Handling Service Manual is written for the company's market service personnel to troubleshoot servo drive systems on site. It covers both the EV630P and EV630N series; where the same fault applies, parameter settings are described in the EV630P decimal format. For the EV630N hexadecimal format, the text gives the mapping between function codes and object dictionary entries.
The document has three parts: a fault alarm section for faults with a code on the drive panel, a fault phenomenon section for problems without a displayed fault code, and appendices. The appendices cover EV630P terminal pin definitions, brake motor wiring, DO and DI wiring, pulse port wiring, braking resistor selection, and a fault list. This manual is written in Chinese.
| Supported encoder type (EV630P) | 17-bit incremental |
|---|---|
| Supported encoder type (EV630N) | 23-bit incremental |
| Input voltage range, 220 V class | 198 V to 264 V effective |
| Input voltage range, 380 V class | 342 V to 484 V effective |
| Built-in braking resistor, EV630PS5R5I | 50 Ω, 50 W |
It covers faults for which the drive panel displays a fault code.
Check whether P00-00 (motor number) is set to 14130.
The object dictionary index is 0x2000 plus the function code group number, and the subindex is the hexadecimal group offset plus 1.
S1R6I, S2R8I, S025I, S032I, T032I, T037I, T045I, T060I, and T075I models have no built-in braking resistor.