EUROtronic Spirit Z-Wave Plus Quick Start Guide

Quick start guide for the EUROtronic Spirit Z-Wave Plus radiator thermostat, covering installation, operation, adapters, removal, and troubleshooting.


EUROtronic Spirit Z-Wave Plus Quick Start Guide - cover page
Brand
Eurotronic
Category
Other Electronics
Document type
Quick Start Guide
Language
German
Pages
21
File format
PDF
File size
2.6 MB
Published
15 November, 2026
Updated
15 November, 2026
MD5 checksum
2703FD420FD7D8189B9B754E9D1C6A19

About this manual

The EUROtronic Spirit Z-Wave Plus is a Z-Wave-compatible energy-saving radiator controller that automatically regulates room temperature according to user settings. This quick start guide covers the package contents, safety notes, controls and display elements, battery insertion, Z-Wave inclusion, and mounting on a radiator with or without an adapter.

The guide also explains device operation, including setpoint adjustment, boost mode, child protection, factory reset, and exclusion. It lists compatible valves and adapters, removal steps, error codes ER1 to ER3, troubleshooting guidance, and legal and warranty information. This manual is written in German.

What's inside

  • Description and package contents
  • Important safety notes
  • Controls and display elements
  • Inserting batteries
  • Z-Wave installation and inclusion
  • Mounting on the radiator without an adapter
  • Mounting on the radiator with an adapter
  • Operating the device
  • Adapters and valve compatibility
  • Removal, help and FAQ, legal notes

Specifications

Radio standardZ-Wave
Power supply2x AA batteries
Setpoint adjustment step0.5 °C
Low battery warning thresholdLess than 15% battery remaining
Warranty period24 months from the date of purchase
Country of manufactureGermany

Frequently asked questions

Which batteries does the Spirit Z-Wave Plus use?

The package contains 2 AA batteries. Do not use rechargeable batteries, and never recharge, short-circuit, or disassemble them because of the risk of explosion.

Which valves do not require an adapter?

Heimeier, Junkers Landys+Gyr, MNG, Honeywell, and Braukmann valves do not require an adapter because they use an M30 x 1.5 mm thread.

How do I remove the Spirit Z-Wave Plus from the Z-Wave network?

Put the Z-Wave controller into exclusion mode, then hold the Boost button for 5 seconds. The LCD shows Node ID 0 after successful removal.

What does error ER2 mean and how is it resolved?

ER2 means no valve was detected. Mount the device correctly on the radiator and use the correct adapter.

Download PDF (2.6 MB)

More Eurotronic Manuals


View all Eurotronic manuals →