Erhardt + Leimer ELFEED KRS 52 is a digital tenter infeed system for high-speed stenter and drying machines.
The ELFEED KRS 52 is a tenter infeed system from Erhardt + Leimer. It is a further development of KRS 51 and uses a pancake motor with planetary gear for higher dynamics and efficiency. The KRS 52 version with digital control is designed for high-speed stenter and drying machines of up to about 130 m/min. The left and right edges of the web are detected by two digital sensors, and the left and right systems operate independently.
The system mainly consists of two web spreaders, two edge sensors FR 55, a power source, controller/amplifier DC 55, and two DC actuators KR 52 with incremental encoders. Edge sensor FR 55 combines contact-free and mechanical scanning and is suitable for patterned, transparent, or poorly reflective materials with a reflection degree of at least 2%. Technical data are provided for the edge sensor, power source, controller/amplifier, and drive.
| Maximum machine speed | up to about 130 m/min |
|---|---|
| Web spreaders | 2 |
| Edge sensors | 2 |
| DC actuators | 2 |
| Edge uncurler scroll rollers | 3 or 4 |
| Edge sensor supply voltage (nominal) | 24 V DC |
| Edge sensor supply voltage (permissible range) | 20 - 30 V DC |
| Edge sensor current input | approx. 100 mA |
| Edge sensor power input | approx. 2.4 W |
| Edge sensor scanning frequency | 100 Hz |
| Edge sensor measuring range | ±10 mm |
| Edge sensor measuring range resolution | 0.1 mm |
| Edge sensor admissible ambient temperature | +10 to +65 °C |
| Edge sensor storage temperature | 0 to +85 °C |
| Edge sensor line length (max.) | max. 25 m |
| Distance between edge sensor and web | 36 mm |
| Edge sensor protection class | IP 65 |
| Edge sensor weight | 0.8 kg |
| Edge sensor minimum reflection degree | at least 2% |
| Power source supply voltage | 110 to 600 V AC |
| Power source rated output | 680 VA |
| Power source nominal voltage | 34 V AC |
| Power source output current | 20 A AC |
| Controller supply voltage | 34 V AC |
| Controller power input | 550 VA |
| Controller power output | 2 x 225 W |
| Controller output current | 2 x 8 A |
| Controller admissible ambient temperature | +60 °C |
| Controller protection class (base plate) | IP 20 |
| Controller protection class (cabinet) | IP 54 |
| Drive admissible ambient temperature | +65 °C |
| Drive protection class | IP 54 |
| Drive nominal positioning speed | 120 mm/s |
| Drive nominal positioning force | 1230 N |
High-speed stenter and drying machines.
±10 mm.
Yes, the left and right systems operate independently of one another.
IP 54.