Operation manual for EP1320C cartridge pump covering safety, specs, control panel, installation, troubleshooting, and technical data.
This manual provides operating instructions and safety guidelines for the EP1320C cartridge pump. It includes specifications, control panel details, installation procedures, troubleshooting tips, exploded views, and technical data. The pump is designed for controlled fluid transfer from 1/10th gallon plastic cartridges, suitable for silicone-type fluids with a viscosity range of 10,000 to 600,000 cps. It features a dual tandem cartridge system and a 15:1 pump ratio, delivering up to 995 psi regulated pressure.
| Power Requirements | 220VAC ± 10%, 50-60Hz |
|---|---|
| Power Consumption | 10W Max |
| Max Air Inlet | 9.9kgf/cm2 |
| Pump Ratio | 15:1 |
| Weight | 18.5kg |
| Temperature Range | -5oC ~ 40oC |
| Dimensions | 272mm (W) 288mm (D) 649mm (H) |
| Maximum Fluid Dispensing Pressure | 60Kg/Cm |
| Air Pressure Range Input | 1.8~7.0Kg/Cm |
| Maximum Fluid Viscosity | 600,000 cps |
| Dispensing Volume Per Stroke | 5.0cc |
| Maximum Fluid Speed | 940 cc/min |
| Maximum Stroke | 19 mm |
| Maximum Operating Temperature | 60oC |
| Weight | 24 Kg |
Maximum fluid dispensing pressure is 60Kg/Cm.
Maximum air inlet pressure is 9.9kgf/cm2.
The suitable viscosity range is 10,000cps – 600,000cps.
Maximum fluid speed is 940 cc/min for 250,000 cps fluid.