Specification sheet for the EMRAX 208 axial flux permanent magnet synchronous motor, covering power, torque, cooling, voltage and weight.
The EMRAX 208 is an axial flux permanent magnet synchronous electric motor that the datasheet describes as compact with high power and torque density. EMRAX states that the 208 was the first motor it developed, that development began in 2005 and that it was originally used in the company founder's glider aircraft; the motor is now also used outside aviation.
The datasheet gives a 208 mm diameter and 85 mm length with a weight of 9.4 to 10.3 kg. Peak power is 86 kW and continuous power 56 kW (subject to motor configuration, drive cycle, thermal conditions and controller capability), peak torque is 150 Nm, maximum speed is 7000 RPM and the operating voltage range is 50 to 580 V. High voltage (580 VDC nominal), medium voltage (390 VDC) and low voltage (140 VDC) versions are listed with air, liquid or combined cooling; EMRAX notes that every EMRAX motor requires sufficient air circulation and should not be completely enclosed.
| Diameter | 208 mm |
|---|---|
| Length | 85 mm |
| Weight | 9,4-10,3 kg |
| Cooling | air / water / combined |
| Peak power | 86 kW |
| Continuous power | 56 kW* |
| Peak torque | 150 Nm |
| Continuous torque | 90 Nm* |
| Maximum speed | 7000 RPM |
| Operating voltage | 50 - 580 V |
| Peak efficiency | 96% |
| Position sensor | resolver / encoder |
| Nominal design voltage | 580 / 390 / 140 VDC |
| Maximum motor temperature | 120 °C |
| Number of pole pairs | 10 |
| Winding configuration | star |
| Rotor inertia | 0,01569 kg*m² |
| Bearing configuration | 6206 | 3206 |
The peak power is 86 kW at 6000 RPM (S2 2 min).
Air cooled (AC), liquid cooled (LC) or combined cooled (CC, air plus liquid).
The maximum speed is 7000 RPM.
Yes. Every EMRAX motor requires sufficient air circulation and should not be completely enclosed.