Operating instructions for ELESA MM-BL-NK, MM-BI-NK and MM-BC-NK pneumatic fastening clamps, covering installation, adjustment, maintenance and safety.
ELESA MM-BL-NK, MM-BI-NK and MM-BC-NK are pneumatic fastening clamps available in sizes 20, 32, 40 and 50, where the size refers to the pneumatic cylinder piston diameter. Each clamp combines a pneumatic cylinder, a metal housing with various fixing options and one or two clamping arms; during clamping, the cylinder drives an integrated cam mechanism that rotates the arms and ends in mechanical locking.
The manual covers safety warnings, intended use, installation and commissioning, operating and switching status indication with the MM-SI proximity sensor, clamping force adjustment, automatic locking checks, maintenance, cleaning, compressed air requirements, lubricants, operating pressure and disassembly/assembly of the pneumatic kit. This manual is written in Italian.
| Available sizes | 20, 32, 40, 50 |
|---|---|
| Size meaning | Pneumatic cylinder piston diameter |
| Maximum permitted clamping arm torque, size 20 | 1.00 Nm |
| Maximum permitted clamping arm torque, size 32 | 1.25 Nm |
| Maximum permitted clamping arm torque, size 40 | 1.50 Nm |
| Maximum permitted clamping arm torque, size 50 | 3.00 Nm |
| Normal working pressure | 6 bar |
| Maximum operating pressure | 10 bar |
| Maximum ambient temperature for MM-SI sensor | 80 C |
| Maximum clamping force, MM-BL-NK size 20 at 6 bar | about 1620 N at 213 deg rotation |
| Maximum clamping force, MM-BL-NK size 32 at 6 bar | about 2920 N at 296 deg rotation |
| Maximum clamping force, MM-BL-NK size 40 at 6 bar | about 4960 N at 324 deg rotation |
| Maximum clamping force, MM-BL-NK size 50 at 6 bar | about 6510 N at 401 deg rotation |
| Maximum clamping force, MM-BC-NK size 20 at 6 bar | about 1030 N at 230 deg rotation |
| Maximum clamping force, MM-BC-NK size 32 at 6 bar | about 2050 N at 420 deg rotation |
The normal working pressure is 6 bar, and this applies to all sizes.
The operating pressure must not exceed 10 bar.
It indicates that the arm is in the clamping position.
No, MM-BI-NK and MM-BC-NK clamps are not suitable for use in arc welding.