Electrolux washing machine user manual covering safety, installation, electrical and water connections, leveling, and the lid safety lock.
This Electrolux washing machine instruction manual covers safety information and installation of the appliance. It explains unpacking, choosing a location, leveling the machine, electrical connection, water inlet and drain hose connection, and the automatic lid safety lock.
The document also includes environmental disposal guidance and Electrolux customer service contact information. This manual is written in Portuguese.
| Voltage | 127 V |
|---|---|
| Voltage | 220 V |
| Circuit breaker for 127 V model | 20 A on the phase |
| Circuit breaker for 220 V model | 15 A bipolar |
| Water inlet pressure | 2.4 to 81 meters of water column (0.02–0.8 MPa) |
| Water inlet thread | 3/4 inch, 14 threads per inch |
| Drain hose height | maximum 140 cm, minimum 90 cm |
| Minimum water tank height above inlet | 2.40 m |
The manual states the inlet water pressure must be between 2.4 and 81 meters of water column (0.02–0.8 MPa); if household pressure is higher, use a pressure reducer.
The lid lock activates only during rinsing and spinning. After spinning ends or is interrupted, wait a few minutes for the lid to release.
Place the drain hose at a maximum height of 140 cm and a minimum of 90 cm. If using a drain outlet, insert it no more than 20 cm into the pipe.
For a 127 V washing machine, the manual calls for a 20 A breaker on the phase.