Manual for installing, powering, configuring, and operating the eGate Kombi-Sky smart building device that measures temperature, humidity, TVOC…
eGate Kombi-Sky is a smart building device that measures air environment parameters including temperature, relative humidity, TVOC, differential pressure, and CO2. The manual covers installation, power supply, settings, operation, and detailed radio configuration.
The device can be wall-mounted or placed freely, and is powered by three LR6 (AA) batteries or an external micro USB supply. Default settings allow immediate use; MekuWin software can configure measurement period, radio network, effort, channel, power, quality, destination, key, and password protection.
| Power supply | Three LR6 (AA) batteries or external micro USB supply |
|---|---|
| Measurement period | 5 minutes to 6 hours (default 30 min) |
| Temperature unit | °C |
| Relative humidity unit | %RH |
| TVOC unit | ppb |
| Differential pressure unit | Pa |
| CO2 unit | ppm |
| Radio frequency | 433.3 + 0.2 MHz * (channel - 1) |
| Default radio effort | 4 |
| Buffer capacity | Approx. 1000 packets (400 in devices manufactured before autumn 2019) |
| Password length | Up to 16 characters |
It is powered by three LR6 (AA) batteries, and an external supply can also be connected through the micro USB socket.
Channel 6.
The device must be exposed to fresh air for at least some hours during each week.
A password of up to 16 characters can be set; if forgotten, only the manufacturer can reset it.