Instruction manual for the E-flite EFLA1080B 80-amp brushless ESC, covering features, specifications, programming menus, and safety.
The E-flite EFLA1080B is an 80-amp switch-mode BEC brushless electronic speed control for model aircraft, with 100-amp burst current and support for 3- to 6-cell Li-Po or 9- to 18-cell Ni-MH/Ni-Cd batteries.
The manual describes its programmable voltage cutoff, brake type, and timing settings, along with operating modes, connector details, and safety warnings.
| Continuous Current | 80A |
|---|---|
| Max Burst Current | 100A (15 sec) |
| Length | 77.0mm (3.0 in) |
| Width | 41.0mm (1.60 in) |
| Height | 15.5mm (0.62 in) |
| Weight | 106 g (3.75oz) |
| Battery Cells | 3-6S Li-Po or 9-18 Ni-MH/Ni-Cd |
| Battery Input Leads | 10 AWG with E-flite EC5 Connector |
| Motor Output Leads | 12 AWG with 4.0mm Gold Bullet Connectors |
| BEC | 5V switch-mode, 5A continuous, 6A max burst |
The default setting is 74% cutoff.
The default setting is Brake Off.
The default setting is 15 degrees.