This manual provides operating instructions, maintenance procedures, troubleshooting guides, and specifications for the Dionex Integral Process Analytical…
This document serves as the Operator's Manual for the Dionex Integral Process Analytical Systems. It covers system configurations, component descriptions, and detailed procedures for startup, routine operation, and shutdown. The guide is intended for users operating General Laboratory Equipment (GLE) and includes safety information and regulatory compliance details.
| Operating Temperature | 10 to 40 °C (50 to 104 °F) |
|---|---|
| Humidity | 5% to 95% relative humidity, noncondensing |
| AE Main Power | 100 to 240 Vac, 50/60 Hz |
| Total Current Limit | 20 A at 120 Vac |
| Short Circuit Current Rating | 5 kA |
| Metering Valve Operating Pressure | 0.28 to 5.5 kPa (40 to 800 psi) |
| Loading Pumps Operating Pressure | 0.28 to 17 MPa (40 to 2500 psi) |
| Peristaltic Pump Operating Pressure | <0.34 MPa (<50 psi) |
| Solenoid Valves Operating Pressure | 0.7 MPa (100 psi), maximum |
| Metering Valve Flow Rate | 15.0 mL/min, maximum |
| Loading Pumps Flow Rate | 3.0 mL/min, maximum |
| AE Enclosure Height | 53 cm (21 in) |
| AE Enclosure Weight | 34 kg (76 lbs) |
The components are intended for use as General Laboratory Equipment (GLE) only and are not for diagnostic procedures.
The total current draw must not exceed 20 A at 120 Vac.
The operating pressure is 0.28 to 5.5 kPa (40 to 800 psi).
The maximum flow rate for the Loading Pumps is 3.0 mL/min.