Cummins B3.3 Series engine operation and maintenance manual covering specifications, engine views, cold weather starting and maintenance service data.
This is the Cummins Operation and Maintenance Manual for B3.3 Series engines, Bulletin No. 3666417-00, printed 3/99. It covers both naturally aspirated and turbocharged versions of the engine and is organized into operating instructions, engine identification and maintenance specifications sections.
The manual gives general engine data such as bore, stroke, displacement, firing order and valve clearance, together with lubrication, cooling, air induction, exhaust, fuel and electrical system specifications. It also includes illustrated engine views showing the location of service points, cold weather starting instructions, fuel recommendations, filter selection part numbers and a list of approved sealants.
| Bore | 95 mm [3.74 in] |
|---|---|
| Stroke | 115 mm [4.528 in] |
| Displacement | 3.26 liters [199 in3] |
| Compression ratio | 18 (naturally aspirated) / 17 (turbocharged) |
| Firing order | 1-2-4-3 |
| Engine weight (dry), less flywheel and electronics | 245 kg [540 lb] naturally aspirated / 255 kg [562 lb] turbocharged |
| Valve clearance | Intake 0.35 mm [0.014 in]; exhaust 0.50 mm [0.020 in] |
| Lubricating oil capacity, total system | 7.5 liters [8.0 qt] naturally aspirated / 8.0 liters [8.5 qt] turbocharged |
| Coolant capacity (engine only) | 4.5 liters [4.75 qt] |
| Thermostat range | Starts to open 82 °C [180 °F], fully open 95 °C [203 °F] |
| Engine rotation | Clockwise viewed from the front of the engine |
| Recommended fuel | ASTM No. 2D diesel fuel with minimum cetane number of 40 |
| Oil filter part number | LF 3855 (standard four-cylinder applications) |
| Minimum recommended battery capacity, light accessories | 12-VDC, 550 CCA |
The manual specifies ASTM No. 2D fuel with a minimum cetane number of 40. Below 0 °C [32 °F], a blend of No. 1D and No. 2D fuel ("winterized" No. 2D) is used.
Run the engine at moderate speeds for 5 minutes before full loads are applied. Below 0 °C [32 °F], special consideration must be given to engine starting.
For standard four-cylinder applications the manual lists oil filter Part No. LF 3855.
Intake valve clearance is 0.35 mm [0.014 in].