CO2+RH+TEMP Portable IAQ Meter Operation Manual

Operation manual for the CO2+RH+TEMP portable IAQ meter and logger, covering CO2, temperature, dew point, wet bulb, humidity, logging and PC software.


CO2+RH+TEMP Portable IAQ Meter Operation Manual - cover page
Category
Monitoring Equipment
Document type
User Manual
Language
English
Pages
24
File format
PDF
File size
876 KB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
52FDF1DC4D47F51C0ECD8FC027D0BFDA

About this manual

This operation manual describes the CO2+RH+TEMP portable IAQ meter and logger. It measures CO2 level, air temperature, dew point, wet bulb temperature and humidity, and uses NDIR technology for CO2 measurement. The document presents features, power supply, LCD display, keypad, measurement operation, data hold, min/max/avg review, manual and automatic logging, memory recall, PC data transmission and review, specifications and CO2 guideline levels.

The meter is powered by four AA batteries or a 5V/1A DC adaptor. It supports 99 manual records and 30,000 automatic records, mini USB output to a PC every 2 seconds, and a software CD for data download and graph review. It is intended for indoor air quality checks in offices, classrooms, factories, hospitals and hotels, and for verifying HVAC performance and air ventilation control.

What's inside

  • Introduction
  • Features
  • Power Supply
  • LCD Display
  • Operation
  • Data Hold
  • Manually Recording
  • 99 Memories Recall
  • Data Transmission
  • Specification

Specifications

CO2 range and accuracy0~9999 ppm; ±30 ppm ±5% of reading (0~5000 ppm)
Temperature range-20~60°C (-5~140°F)
Temperature accuracy±0.3°C/±0.6°F at 5~40°C
Relative humidity range0.1%~99.9%RH
Relative humidity accuracy±3%RH (at 25°C, 10~90%RH); ±5%RH (at 25°C, other range)
Power supplyAA x 4pcs or 5V adaptor
Battery life>24 hours (Alkaline battery)
Weight200g
Memory capacity99 manual points; 30000 automatic points

Frequently asked questions

What parameters can the CO2+RH+TEMP meter measure?

It measures CO2 level, air temperature, dew point, wet bulb temperature and humidity.

How is the meter powered?

It is powered by four AA batteries or a 5V/1A DC adaptor.

How many records can the meter store?

It can store 99 manual records and 30000 automatic records.

What CO2 sensing technology does the meter use?

It uses NDIR (non-dispersive infrared) technology for the CO2 sensor.

Download PDF (876 KB)

Also Manuals