Operation manual for the Clinical Electric OM-ER206E electric micromotor, covering setup, safety cautions, motor handling, speed settings, and foot air…
The Clinical Electric OM-ER206E operation manual covers an electric micromotor system with a control box, motor, motor cord, AC adapter, and handpiece connections. It presents safety classifications and cautions, a set-up diagram, specifications, and instructions for operating the control box and handling the motor.
The operation section explains power-on, handpiece speed selection, maximum speed setting, FWD/REV selection, and foot air calibration for the delivery system. The manual also lists storage and operating environment limits and states that service inquiries should be sent to Brasseler USA.
| Motor speed | 2,000 - 40,000 min-1 (rpm) |
|---|---|
| Motor dimensions | Ø22.5 × L81 mm |
| Motor weight | 76 g |
| AC adapter rated input | AC120V 50/60Hz, 41VA |
| AC adapter output | AC28V 1.3A |
| Fuse rating | T1.6A 250V |
| Drive air pressure | 57 psi (4 bar) or less |
| Storage environment | Temperature -10 to 60°C (14 to 140°F), humidity 10 to 85%RH |
| Operating environment | Temperature 0 to 40°C (32 to 104°F), humidity 10 to 85% RH |
The manual instructs the user to perform the Foot Air Calibration function before using the product. Once adjusted, the setting is memorized.
The motor speed range is 2,000 to 40,000 min-1 (rpm).
Insert an E-type handpiece into the motor insert and turn it until it clicks and the positioning marks are aligned. To disconnect, pull the handpiece out from the motor.
No. The manual states not to autoclave or use other high-temperature sterilization on the control box, AC adapter, or motor cord.