CAREL IR32 digital thermostat parameter sheet for fridge/freezer, covering error codes, set point adjustment, deep programming, reset, and wiring connections.
This document is the parameter sheet for the CAREL IR32 digital thermostat for fridge/freezer applications. It lists error types and remedies, describes the display and keys, and explains how to modify the set point and deep programming parameters.
Table 1 gives default values and ranges for set point, function mode, differential, output status, and temperature units. Page 2 shows wiring connections for the CAREL IR32V0E000 model, including the NTC probe, 12÷24 Vac/Vdc power supply, and thermostat contact output. This manual is written in Italian.
| Power supply | 12÷24 Vac/Vdc |
|---|---|
| Default set point | Fridge 4°C, Freezer 18°C |
| Function mode | 1 (Direct), range 1 ÷ 9 |
| Differential | 1°C, range 0.1 ÷ 99.9 |
| Temperature unit | 0 (°C), range 0 (°C) ÷ 1 (°F) |
| Probe type | NTC |
Press SEL for some seconds until St1 appears, then use Up or Down to set the value and press SEL to confirm.
The password is 77, selected with the Up key and confirmed with SEL.
Switch the instrument off, then switch it back on while holding down the Prg/mute key.
It uses 12÷24 Vac/Vdc power.