Key facts
- Manuals
- 11
- Models
- 1
- Categories
- 1
- Languages
- EN · TR · ZH
- Last added
- 2026-10-03
Carel models by category
Featured Carel manuals
Carel EVD Evolution TWIN User Manual
The Carel EVD Evolution TWIN is a DIN‑rail controller with two drivers for double‑pole stepper motors, designed to manage two electronic expansion valves independently. It features plug‑in screw terminals, optional LED or graphic display, and supports various network interfaces (tLAN, pLAN, RS485/Modbus®). The manual covers installation, commissioning, control functions, parameters, alarms and troubleshooting.
Installation includes wiring of pressure probes (up to 10 m, 30 m shielded), digital inputs, and power cables, with recommendations to keep power and signal cables separate to avoid electromagnetic interference. The controller can be powered from 24 Vac or 24 Vdc, and a battery module (EVBAT00400) provides 12 Vdc backup to close the valves during a power loss.
Covers: Introduction · Installation · User Interface · Commissioning · Control · Functions
Carel IR33 Digital Controller Cabin and Bench Setting Training
This document provides technical information and step‑by‑step instructions for configuring the Carel IR33 digital controller in cabin and bench applications. It explains the differences between SB and HD cabinet models, sensor types, alarm handling, and IP protection levels.
The guide details the programming menu navigation, how to view and adjust sensor values, and procedures for resetting alarms such as the "Ser" and "CLn" messages. It also describes new features like the capacitor probe and IPX1 to IPX5 protection for HD cabinets. This manual is written in Turkish.
Covers: Ana Özellikler · SB ve HD Kabin Farkları · Sondalar ve Konumları · Kondansatör Sondası ve Alarmları · IP Koruma Seviyeleri · Programlama Menüsü
CAREL EVD Evolution Electronic Expansion Valve Driver User Manual
This user manual describes the CAREL EVD Evolution electronic expansion valve driver, a PID controller for superheat regulation in refrigeration circuits. It covers the driver’s hardware, wiring diagrams, power requirements, input/output connections, and the optional display unit used for commissioning and parameter programming.
The document also details the configuration steps for network address, refrigerant type, valve type and main regulation mode, as well as safety warnings, LED indicators, and firmware update procedures. Compatibility with a wide range of refrigerants and valve models is listed, and technical specifications such as power supply limits, relay ratings and maximum cable lengths are provided.
Covers: Installation · Wiring Diagram · Configuration Procedure · Technical Specifications · Safety Warnings · LED Indicators
Carel MAC2SER000 Electrical Specification Manual
This manual provides the complete electrical specifications for the Carel MAC2SER000 controller, covering power supply requirements, analogue and digital inputs and outputs, PWM and relay functions, as well as environmental limits and protection ratings. It also includes wiring diagrams, connector details, and installation templates.
Key data include a 24Vac ±15% power source, 200 mA current absorption, 800 mA slow‑blow fuse, 10 digital inputs (5 mA each), 3 NTC temperature inputs, a 0‑10 V analogue output (10 mA load), PWM output at 4.8 V ±10%, and IP55 front‑panel protection. Operating temperature ranges from –30 °C to 70 °C with humidity up to 100 % rH. This manual is written in Chinese.
Covers: Electrical specifications · General specifications · Interfaces · Dimensions · Contact codes · Installation template
Latest Carel manuals
Carel EVD Evolution TWIN User Manual
User Manual 56 pages · 2.1 MB · ENUser manual for the Carel EVD Evolution TWIN controller that drives two electronic expansion valves.
Carel IR33 Digital Controller Cabin and Bench Setting Training
User Manual 21 pages · 3.2 MB · TRTraining guide for Carel IR33 digital controller covering cabin and bench configuration, sensor setup, and alarm functions.
CAREL EVD Evolution Electronic Expansion Valve Driver User Manual
User Manual 2 pages · 876 KB · ENThe CAREL EVD Evolution driver manual provides installation, wiring, configuration and safety information for the electronic expansion valve driver.
CAREL - 3 ENG Passive probe man. 030220655 - rel. 1.1 - 05.02.2009 IMPORTANT CAREL
This file is a user manual for Carel products, introduces the characteristics and usage methods of the products.
CAREL REFRIGERATION CONTROLLERS SPECIFICATION PJ32 easy REFRIGERATION CONTROLLER
The PJ32 easy refrigeration controller from Tempatron Ltd is specifically designed for the management of refrigerated units, display cases, and chilled showcases. It is available in versions with 1, 2, and 3 relay outputs, and comes with preset configurations for different applications.
CAREL temperature humidity sensor user manual
This manual introduces the features and characteristics of CAREL temperature and humidity sensors (AS series), including different types, codes and accessories, installation methods, technical parameters, etc.
Carel MAC2SER000 Electrical Specification Manual
Datasheet 1 pages · 680 KB · ZHThe Carel MAC2SER000 electrical specification manual details power, I/O, environmental and safety parameters for the controller.
CAREL pCO3 controllore elettronico electronic controller Manual
CAREL ir33 Platform User Manual
User Manual 58 pages · 787 KB · ZHThe CAREL ir33 platform user manual provides installation, programming, interface and alarm information for the controller.
Carel pCO1 Controller User Manual
User Manual 47 pages · 1023 KB · ZHUser manual for the Carel pCO1 controller, covering installation, wiring, safety warnings and operation.
Carel pCOxs User Manual
User Manual 42 pages · 883 KB · ZHUser manual for the Carel pCOxs controller and hand‑operated interface, covering installation, wiring, and troubleshooting.
Which document do I need?
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Datasheet
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in Carel manuals
How can the "Ser" alarm be reset?
Press the PRG and UP buttons together; this resets the "Ser" alarm and the capacitor temperature delay.
From: Carel IR33 Digital Controller Cabin and Bench Setting Training
How do you access the programming menu on the IR33 controller?
Hold the SET and PRG buttons for more than 5 seconds; the system will then request a password.
From: Carel IR33 Digital Controller Cabin and Bench Setting Training
Which refrigerants are compatible with the EVD Evolution driver?
The driver supports R22, R134a, R404A, R407C, R410A, R507A, R290, R600, R600a, R717, R744, R728, R1270, R417A, R422D, R413A, R422A, R423A, R407A, R427A, R245Fa, R407F, R32, HTR01 and HTR02.
From: CAREL EVD Evolution Electronic Expansion Valve Driver User Manual
How many drivers can be connected together in a network?
Up to five drivers can be connected in a single network.
From: CAREL EVD Evolution Electronic Expansion Valve Driver User Manual
What is the required power supply voltage for the Carel MAC2SER000 controller?
The controller requires a 24Vac supply with a tolerance of ±15% at 50/60 Hz.
How can I reset a manual alarm?
Press PRG+UP/AUX for more than 5 seconds to reset any manual alarm.