Instruction manual for the BVA Hydraulics PED0501T series electric hydraulic pump: specifications, safety warnings, setup and operation.
This is the BVA Hydraulics Electric Pump Instruction Manual (document PED0501T-M0, 08/2015, printed in Taiwan) published by SFA Companies in Kansas City, MO. It covers the electric hydraulic pump models PED0501T, PED0501T-230V50, PED0502T and PED0503T, which supply hydraulic fluid at a maximum operating pressure of 10,000 PSI to rams, presses, spreaders, compactors and crimping machines.
The manual describes the pump components and specifications table, gives extensive hydraulic pump and hose safety warnings, and explains setup including electrical and hydraulic connections. It then walks through operation using the flipper control valve HOLD/RELEASE positions and the remote pendant switch, and notes that the 2-way, 2-position dump valve is intended for single-acting cylinders or applications.
| Maximum Operating Pressure | 10,000 PSI |
|---|---|
| Usable Oil Capacity | 1 gal (PED0501T), 2 gal (PED0502T), 3 gal (PED0503T) |
| Valve Type | 2-way, 2-position automatic dump valve |
| Valve Function | Advance / Return; holds pressure in advance position when valve motor is shut off |
| Motor | 0.5 HP |
| Motor Voltage | 115 V or 230 V |
| Reservoir Oil Level | About 2 in. from top of reservoir plate, cylinders retracted and motor off |
The pump's maximum operating pressure is 10,000 PSI, and all hydraulic equipment used with it must be rated at 10,000 PSI operating pressure.
No. The E-Pump is shipped without hydraulic oil filled, and oil must be added before starting the motor and operating.
Turn the flipper control valve clockwise to the RELEASE position.
It covers models PED0501T, PED0501T-230V50, PED0502T and PED0503T.