Bruker technical manual for the BTSPS MON 1 200/60C5U power supply (Version EC00): identification, input/output specifications, installation, safety, wiring…
This is the Bruker technical manual for the BTSPS MON 1 200/60C5U power supply, Version EC00, dated June 2004 and issued by Bruker BIOSPIN in Wissembourg, France. The unit carries P/N W1213137 and the manual P/N W1213142. It opens with the power supply identification data and its output and input specifications, including stability, and gives the technical contact.
The manual then covers general installation instructions, safety instructions and maintenance, followed by wiring diagrams and board-level descriptions: the B-EC1 main board, the BEC-1 display board, the BMC-20 CPU interface board, the power stage, the SEM thyristor controller, the shunt amplifier, the U/BH15 divider adjustment, the board auxiliary power supply and the zero crossing kit. It closes with warranty extracts and the Bruker after-sales contact for power electronics.
| Output voltage | 200 V |
|---|---|
| Output current | 60 A |
| Output power | 12 kW |
| Load resistance | 3.33 ohm |
| Power line voltage | 400 V |
| Line fuses/protection | 40 A |
| Nominal power | 17 KVA |
| Cooling mode | Water and air |
| Max input pressure | 10 Bars |
| Minimum flow rate | 2 l/mn |
| Max water input temperature | 30°C |
| Ambient air max temperature | 30°C |
Channel 1 delivers 200 V at 60 A, which is 12 kW into a 3.33 ohm load resistance.
It uses a three-phase line without neutral at 400 V, with 40 A line fuses/protection and a nominal power of 17 KVA.
Both water and air cooling are marked; maximum input pressure is 10 Bars, minimum flow rate 2 l/mn and maximum water input temperature 30°C.
The warranted period is 12 months starting from the site installation made by a Bruker engineer, or at maximum 18 months from the delivery date.