Installation, safety, operation and maintenance guide for Brandt built‑in gas hobs TG1431B, TG1432B, TG1483B and TG1493B.
This manual provides step‑by‑step installation instructions for qualified installers, including ventilation requirements, gas‑connection guidelines and dimensions for fitting the hob into kitchen furniture. It also details the required gas type, heat input, rated voltage and product size for each model.
The document covers safe usage, cleaning and maintenance procedures, troubleshooting tips for ignition or flame issues, and advises on the use of appropriate cookware. Contact information for authorized service centres and safety precautions are included throughout.
| Product size | TG(1100 pa) |
|---|---|
| Rated voltage | TG(1100 pa) |
Wash them with warm water without abrasive powders or corrosive substances, then rinse and dry thoroughly.
Check that the gas supply and valves are open, ensure the gas holes are not clogged, and verify the knob is pressed fully.
The room must have a ventilation system that vents smoke and gases to the outside, with at least 2 m³/h per kW of installed capacity.
The maximum length of the flexible pipe must not exceed 2000 mm.