Bien-Air HP 1:2 Dental Straight Handpiece User Manual

Chinese user manual for the Bien-Air HP 1:2 dental straight handpiece, covering intended use, technical data, operation, maintenance and sterilization.


Bien-Air HP 1:2 Dental Straight Handpiece User Manual - cover page
Brand
Bien Air
Category
Professional medical equipment
Document type
User Manual
Language
Chinese
Pages
14
File format
PDF
File size
608 KB
Published
10 November, 2026
Updated
10 November, 2026
MD5 checksum
19BAD18EEB18DFE3E289FDABA187AA3D

About this manual

The Bien-Air HP 1:2 is a dental straight handpiece with external water spray, no illumination and a 2x speed-increasing ratio. It is intended for professional use in dental treatment and oral surgery and can be mounted on any ISO 3964 type micro motor; the technical data list a maximum motor speed of 40,000 rpm and a maximum handpiece speed of 80,000 rpm, with 110 mm total length, 19.8 mm maximum diameter and 95 g weight.

The Chinese instructions cover bur replacement, the Spray HP 1:2 and single-use bur guard, cleaning and disinfection, lubrication, inspection, packaging, steam sterilization, repair, and transport and storage conditions. They also include intended-use limitations and warranty information. This manual is written in Chinese.

What's inside

  • Intended Use
  • Technical Specifications
  • Handpiece Use
  • Maintenance
  • Cleaning and Disinfection
  • Lubrication, Inspection and Adjustment
  • Sterilization
  • Other Usage Precautions
  • Warranty
  • Transport and Storage Conditions

Specifications

Handpiece typeDental straight handpiece, external water spray, no illumination, 2x speed increasing
CouplingISO 3964
DriveAny ISO 3964 type micro motor
Maximum motor speed40,000 rpm
Transmission ratio2x speed increasing, red instrument sleeve
Maximum handpiece speed80,000 rpm
Total length110 mm (4.33 in)
Maximum diameter19.8 mm (0.78 in)
Bur shank2.35 mm diameter, type 2 per ISO 1797, maximum 44.5 mm, code 4 per ISO 6360/1

Frequently asked questions

What is the maximum motor speed for the HP 1:2?

The HP 1:2 can be used with a micro motor at a maximum of 40,000 rpm; its 2x ratio gives a maximum handpiece speed of 80,000 rpm.

What type of bur does the HP 1:2 accept?

It accepts burs with a 2.35 mm shank, type 2 per ISO 1797, up to 44.5 mm long and with code 4 per ISO 6360/1.

How should the HP 1:2 be sterilized?

Steam sterilize it using a Class B cycle according to EN13060 after reaching the pre-vacuum stage; the handpiece can withstand 135°C for 3 or 18 minutes.

Can the HP 1:2 be used for non-dental procedures?

No. It is for professional use only in dental treatment and oral surgery, and any other use is prohibited.

Download PDF (608 KB)