BFT 4.4.6 Cellular Intercom System Installation & User Manual

Installation and operating instructions for the BFT 4.4.6 Cellular Intercom System, including GSM setup, programming, and app configuration.


BFT 4.4.6 Cellular Intercom System Installation & User Manual - cover page
Brand
BFT
Category
Other Electronics
Document type
User Manual
Language
English
Pages
27
File format
PDF
File size
1.4 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
92E8CC5F2EA21D34DE2905E1E2810F28

About this manual

The BFT 4.4.6 Cellular Intercom System is a GSM-based access control device designed for gates and doors. It allows users to open gates via stored phone numbers, keypad codes, or a dedicated mobile application, and requires a regular voice and SMS SIM card to operate.

The system supports dual 2G/3G networks and can be installed in pedestal or architectural wall-mount styles. It includes features such as Caller ID access control, 'Do Not Disturb' scheduling, and remote control via SMS.

What's inside

  • Overview of system
  • Site Survey
  • SIM card
  • Power
  • Call Box Overview
  • Mounting
  • Connections on GSM Controller
  • Programming
  • Using the Intercom
  • Setting up the App on Android & Iphone

Specifications

Power Supply15v d.c. 3amp
Network Compatibility2G/3G (850/900/1800/1900MHz)
Supported US NetworksAt&T and T-Mobile
Fuse400mA quick blow

Frequently asked questions

What type of SIM card is required for the BFT 4.4.6 system?

A regular voice and SMS text SIM card is required; data-only SIMs will not work.

How is the GSM unit programmed?

Programming is performed by sending specific SMS text messages to the unit from a phone.

What should be done if the GSM signal is poor?

You can increase the antenna height, request a higher gain antenna, or change to a network with better coverage.

Download PDF (1.4 MB)

More BFT Manuals


View all BFT manuals →