User manual for the BenQ FP72E S and FP92E S LCD color monitors, covering setup, driver installation, OSD settings, troubleshooting and specifications.
This user manual covers the BenQ FP72E S (17.0") and FP92E S (19.0") LCD color monitors. It explains what is included in the box, how to assemble the stand base, connect the D-Sub or optional DVI-D video cable, audio cable and power cord, and how to detach the base or use the wall mounting kit.
It also walks through installing the monitor driver on Windows XP and Windows 2000, adjusting screen resolution and refresh rate, using the control panel and On Screen Display (OSD) menus including hot key mode, and provides a troubleshooting section with frequently asked questions, supported PC timings and full specifications for both models.
| FP72E S viewable diagonal | 17.0", active, TFT (43.2 cm) |
|---|---|
| FP92E S viewable diagonal | 19.0", active, TFT (480 mm) |
| Native (maximum) resolution | 1,280 x 1,024 |
| Colors | 16.7 million |
| Contrast / Brightness | 800:1 / 300 cd/m2 |
| Response time | 5 ms |
| Line frequency | 31 - 83 kHz |
| Image frequency | 50 - 76 Hz |
| Power management | VESA DPMS, EPA |
| FP72E S max. power consumption | 45 Watt |
| FP92E S max. power consumption | 50 Watt |
| Standby power consumption | < 1 Watt |
| Input signal | RGB analog 0.7 Vpp/75 Ohm positive; digital DVI-D (optional) |
| Speaker | 1 W x 2 |
| Operating temperature | 0 °C - 40 °C |
| Operating air humidity | 10% - 90% |
| Operating voltage | Automatic switched mode power supply, 100-240 V, 50-60 Hz |
| FP72E S dimensions (H x W x D) | 369 x 371.6 x 151.3 mm |
| FP72E S weight | 3.9 kg |
| FP92E S dimensions (H x W x D) | 409.2 x 408.8 x 167 mm |
| FP92E S weight | 4.8 kg |
| Certifications | TCO 03, TÜV/Ergonomics, TÜV/GS, FCC Class B, ISO 13406-2, VCCI, CB Report, CE, C-Tick, BSMI, Fimko, GOST, CSA, CCC, eK |
Always unplug the monitor from the wall outlet before cleaning, and clean the LCD surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.
No, do not use both cables on the same PC. Both can only be used if they are connected to two different PCs with appropriate video systems.
Standby power consumption is less than 1 Watt for both the FP72E S and FP92E S.
Do not attempt to service the product yourself, as opening or removing covers may expose you to dangerous voltages. Contact qualified service personnel for servicing.