Installation instructions for the B&W Signature 8NT 3-way in-wall speaker, covering wall frame, baffle, and back box assembly.
The B&W Signature 8NT is a 3-way in-wall speaker designed for true audiophile performance. The system consists of four separate modules: the wall frame and grille, the baffle with drive units and crossover, the PMK (Pre/post Mount Kit), and the back box. The wall frame and grille are required for all installations and are delivered together in a master carton. The PMK and back box are optional depending on the specific application and wall construction type.
| Speaker Type | 3-way in-wall speaker |
|---|---|
| Minimum Operating Volume | 40 litres (1.4 cu ft) |
| Minimum Clear Height (Vertical) | 120cm (4 ft) |
| Clear Vertical Spacing (Horizontal) | 38cm (15 in) |
| Distance from CRT TVs | 50cm (20 in) |
Yes, the speaker may be bi-wired or bi-amplified if desired by snipping the link wires on the crossover board.
The speaker should be kept at least 50cm (20 in) clear of televisions containing conventional cathode ray picture tubes.
A minimum of 120cm (4 ft) clear height in the cavity not obstructed by cross studs is required.