Spanish user manual for the Automatice RTU5024, a GSM remote relay controller that opens doors, gates and barriers with a free phone call.
This is the Spanish-language user manual (Manual de Usuario) for the RTU5024, a remote relay controller distributed by Automatice of Santiago, Chile. The device works over the quad-band GSM network: an authorized user calls the unit's SIM card number, the call is rejected at no cost, and the relay output toggles to open a door, gate, barrier, roller shutter or parking door, or to switch equipment on and off remotely. Up to 200 authorized numbers can be stored, each optionally restricted to a specific time window, and the unit can send SMS confirmations when the relay switches.
The manual covers product details and features, technical specifications, dimensions, box contents, typical applications (residential, industrial, agricultural and commercial), safety instructions, wiring diagrams, and installation and configuration via SMS commands, including changing the password, managing authorized numbers, and setting the relay on-time. The default password is 1234 and all SMS commands must be sent in capital letters. This manual is written in Spanish.
| GSM frequency | Quad-band 850/900/1800/1900 MHz |
|---|---|
| Digital output | NC/NO dry contact, 3A/240VAC |
| Power supply | DC 9~24VDC/2A |
| Power consumption | 12V input max. 50mA, average 25mA |
| SIM card | Supports 3V SIM card |
| Antenna interface | 50Ω SMA |
| Operating temperature | -20~+60 °C |
| Humidity range | 90% relative humidity |
| Dimensions | 102 mm wide x 76 mm deep x 27 mm high |
| Net weight | 180 g |
| Authorized users | Up to 200 |
The default password is 1234. It can be changed with the SMS command 1234P followed by the new password.
Press and hold the RESET button next to the SIM card socket, power on the unit, and release the button after 6 seconds. This restores the default password 1234 and other parameters, but authorized users remain in memory.
No, the call is free because the RTU5024 rejects the incoming call after using it to trigger the relay.
The on-time is set with the GOT command in seconds from 000 to 999: 000 gives a 0.5-second pulse, 999 keeps the relay on until the next call, and any other value sets the duration in seconds.