The Anybus X-gateway Modbus‑TCP EtherNet/IP User Manual provides installation, configuration, and operation instructions for the gateway.
This manual describes the Anybus X-gateway that connects a Modbus‑TCP network to an EtherNet/IP network. It covers hardware mounting, power requirements, and the steps needed to bring the device online and exchange I/O data between the two networks.
Key sections include getting started, SD‑card functionality, Modbus‑TCP functions, network configuration, CIP objects, and a technical specification appendix with power, temperature, and EMC details. The document also explains how to use the Anybus IPconfig tool for IP address discovery and configuration.
| Power Supply Voltage | 24 V DC (20.4 V to 28.8 V) |
|---|---|
| Power Consumption | 150 mA at 24 V (typical) |
| Operating Temperature | -25 °C to +70 °C |
| Storage Temperature | -40 °C to +85 °C |
| Relative Humidity | 5 % to 95 % non‑condensing |
It requires a regulated 24 V DC power source, with an acceptable range of 20.4 V to 28.8 V.
The typical power consumption is 150 mA when operating at 24 V.
The device operates from –25 °C up to +70 °C.
Use the Anybus IPconfig tool, which scans the network and lists the X‑gateway by type or MAC address.
This manual explains 8 error codes. Open a code for its meaning, causes and what to do: