Acrel DDSY1352 single-phase prepaid energy meter manual: functions, technical parameters, dimensions, wiring and installation, card operation and communication.
This is the installation and user manual (V1.4) for the Acrel DDSY1352 single-phase electronic prepaid energy meter. The meter measures single-phase AC active energy at a rated frequency of 50 Hz and provides prepaid billing, load control and optional RS485 communication; its performance is stated to meet GB/T18460.3-2001.
The manual lists the main functions and technical parameters, gives the outline dimensions, describes 35 mm DIN-rail mounting and the wiring of the meter and its control terminals to a dedicated prepaid circuit breaker, and explains card insertion, purchasing electricity, active energy metering, the two-level alarm and trip control, the display sequence and IC-card error codes. A final chapter covers the MODBUS-RTU and DL/T645-1997 communication protocols with register and data-identifier tables. This manual is written in Chinese.
| Working voltage range | AC 220 V ±20% |
|---|---|
| Reference frequency | 50 Hz |
| Basic current | 10 A |
| Maximum current | 60 A |
| Active energy accuracy | Class 1 |
| Dimensions (L×W×H) | 72 mm × 85 mm × 70.5 mm (4 modules) |
| Pulse constant | 1600 imp/kWh |
| Communication interface | RS485 (A+, B-) |
| Communication protocol | MODBUS-RTU or DL/T645-1997 |
| Operating temperature | -20 °C to 60 °C |
| Storage temperature | -30 °C to 70 °C |
| Maximum wiring capacity | 25 mm² flexible cable |
| Mounting | 35 mm standard DIN rail |
| Compliant standard (measurement) | GB/T17215.321-2008 |
It uses either the MODBUS-RTU protocol or the DL/T645-1997 protocol over an RS485 interface. The manual refers to the relevant protocol standards for the exact frame formats.
The DDSY1352 is mounted on a 35 mm standard DIN rail.
The meter automatically trips and cuts the power, and the display shows a remaining energy of 000000.00 kWh. Power is restored only after the user purchases electricity.
In normal display mode the meter cycles through the information screens automatically, switching every 2 s.