Installation and operation guide for the ADL200 single‑phase electronic electricity meter with RS485 communication.
The ADL200 is a single‑phase electronic electricity meter designed for low‑voltage networks. It measures active energy, voltage, current, power and supports RS485 communication for remote monitoring and data collection.
The manual provides an overview of functions, technical specifications, wiring and installation instructions, troubleshooting steps, operation details, and communication setup for MODBUS‑RTU and DL/T645 protocols. This manual is written in Chinese.
| Rated voltage | AC220V |
|---|---|
| Frequency | 50 Hz |
| Power consumption | <10 VA |
| Basic current | 10 A |
| Current rating | 80 A |
| Measurement accuracy | Class 1 |
| Measurement range | 0 – 99 999 999 kWh |
| Clock accuracy | ≤0.5 s/day |
| Pulse constant | 1000 imp/kWh |
| Communication interface | RS485 (A+, B‑) |
| Supported protocols | MODBUS‑RTU, DL/T645‑07, DL/T645‑97 |
| Physical dimensions | 90 mm × 36 mm × 65 mm |
| Operating temperature range | -25 °C ~ 55 °C |
Enter the programming menu, select item 1 (ADDR), and set the address to a value between 1 and 254.
The meter supports RS485 communication using MODBUS‑RTU, DL/T645‑07 and DL/T645‑97 protocols.
Long‑press any key for about 3 seconds to access the PASS screen, then enter the password to modify parameters.