The HHBY THB6128 is a high-subdivision, high-voltage two-phase hybrid stepping motor drive chip. It uses dual full-bridge MOSFET drive with low on-resistance and supports microstep settings from 1 to 1/128.
The chip operates with a 9 to 36 V motor supply and up to 2.2 A peak output current. It provides fast, slow, and mixed decay modes, automatic half-current hold, and built-in over-temperature and over-current protection. This manual is written in Chinese.
| Maximum withstand voltage | 36 V |
|---|---|
| Maximum output current | 2.2 A |
| Supply voltage range | 9 to 36 V |
| Logic input voltage | 4.5 to 6 V |
| Operating temperature | -20 to +85 °C |
| Storage temperature | -55 to +150 °C |
| Microstep settings | 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128 |
| On-resistance | 0.55 Ω |
It supports 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, and 1/128 microsteps.
The maximum withstand voltage is 36 V.
The output current is set using Io = VREF × (1/5) × (1/Rs).
The chip enters standby mode, logic is reset, and outputs are turned off.