This document is the user manual for JURA Typ 643 IMPRESSA X7-s, which introduces the use of the coffee machine, including safety operation precautions, preparations before using the coffee machine, turning on the machine, wetting the coffee machine, selecting the grinder, adjusting the grinder, adjusting the water hardness, filter, making coffee, hot water, steam, milk frothing, turning off the machine, and programming settings.
This manual covers everything you need to know to install, operate and care for the Jura Impressa X7-s coffee maker. It includes safety guidelines, power‑on procedures, bean‑grinder selection, water‑hardness adjustment, filter replacement, coffee‑making steps, hot‑water and steam functions, and detailed program settings.
The document also contains troubleshooting tips, a list of error messages with solutions, and a technical‑parameters section that specifies voltage, power consumption, water‑pump pressure, capacity and dimensions. All instructions are illustrated with diagrams and screen‑display prompts. This manual is written in Chinese.
| Voltage | 220 VAC |
|---|---|
| Power | 2200 W |
| Fuse | 6.5 A |
| Standby power consumption | ≈ 3 Wh |
| Working power consumption | ≈ 51 Wh |
| Bean hopper capacity | 2 × 650 g |
| Grounds container capacity | up to 40 cups |
| Power‑cord length | ≈ 1.8 m |
| Weight | 17.3 kg |
| Dimensions (W×H×D) | 43 × 58.5 × 51 mm |
The message can mean the tank is empty, the float is faulty, or there is scale in the tank. Add fresh water, empty and rinse the tank, then reinstall it.
When the screen prompts “Replace water filter”, turn off the machine, press the key combination shown in the figure, open the filter holder, insert a new filter, close the holder, fill the tank with fresh water and run 0.5 L through the machine.
When the screen shows “EMPTY DRAWER”, the machine stops brewing. Open the drawer, remove the grounds container, empty it, clean it, then re‑insert it before continuing.
Press the power button, then the program key until you hear a tone. The screen will show the current level; use the “+” or “–” keys to select the desired level and confirm with the program key.