This document is the operation manual for the Sharp Plasmacluster Ion Generator, which provides information on installation position, operation, and cleaning and maintenance of the product.
The IG-BL20A Plasmacluster Ion Generator is a home appliance that releases high‑density ions to help reduce airborne contaminants. This manual explains how to install the unit, operate it safely, and maintain its performance.
The guide includes important safety warnings, detailed installation positioning, a description of all parts, operating modes, cleaning and filter‑reset procedures, technical specifications, and a troubleshooting chart for common issues.
| Power Supply | 220V, 50 Hz |
|---|---|
| Power Consumption (W) | 13 (HIGH), 8.5 (MED), 5.5 (LOW) |
| Operating Noise Level (dBA) | 42 (HIGH), 36 (MED), 28 (LOW) |
| Air Flow Volume (m³/h) | 270 (HIGH), 210 (MED), 156 (LOW) |
| Cord Length | 1.8 m |
| Dimensions (W × H × D) | 392 mm × 500 mm × 182 mm |
| Weight | 5.8 kg |
| Standby Power | ≈ 0.8 W |
It should be replaced approximately every 2 years (17,500 hours) when the unit runs 24 hours a day; the unit stops after about 26 months (19,000 hours) if not replaced.
Detach the filter, remove dust with a vacuum cleaner, then press the Filter Reset Button for 3 seconds after cleaning.
Use only a 220 V outlet, never touch the plug with wet hands, keep the unit away from water, and do not operate it near gas appliances or flammable substances.
The unit consumes 13 W on HIGH, 8.5 W on MED, and 5.5 W on LOW fan speed settings.