The UTT ReOS_SE3.0 Router Advanced Configuration Manual explains hardware installation, system setup, network, user, traffic, firewall, VPN and other features.
This manual provides step‑by‑step instructions for configuring UTT routers that run the ReOS_SE3.0 software platform. It covers everything from hardware installation and initial login to detailed network, security and VPN settings.
Key sections include hardware installation, system monitoring, network configuration, user and behavior management, traffic control, firewall policies, VPN setup, and system maintenance tasks such as logging and scheduled jobs. This manual is written in Chinese.
| Ethernet standards | IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet |
|---|---|
| Supported protocols | TCP/IP, DHCP, ICMP, NAT, PPPoE, static routing |
| Operating altitude | 0‑4000 m |
| Relative humidity | 10‑90 % non‑condensing |
| Default LAN IP address | 192.168.1.1/255.255.255.0 |
| Default admin credentials | admin / admin |
Press and hold the Reset button for more than 5 seconds while the device is powered on, then release; the router will restore factory settings and reboot.
The default username is admin and the default password is admin (case‑sensitive).
It supports TCP/IP, DHCP, ICMP, NAT, PPPoE and static routing protocols.