This manual introduces the installation of FortiGate-60/60M/ADSL, FortiWiFi-60 and FortiGate-100A devices
This manual provides step‑by‑step instructions for installing and configuring Fortinet FortiGate‑60 series, FortiWiFi‑60 and FortiGate‑100A V3.0 MR1 devices. It covers hardware installation, initial power‑up, default configuration, and network integration using both the web‑based manager and CLI.
The guide also details advanced tasks such as modem and ADSL interface setup, wireless network configuration, firmware upgrade procedures, USB auto‑install, and backup firmware image handling. Safety warnings and hardware specifications are included throughout. This manual is written in Chinese.
| Dimensions | 10.25×6.13×17.5 in (26×15.6×34.5 cm) |
|---|---|
| Weight | 1.5 lb (0.68 kg) |
| DC input voltage | 12 V |
| DC input current | 5 A |
| Operating temperature | 32 °F to 104 °F (0 °C to 40 °C) |
| Storage temperature | -13 °F to 158 °F (‑25 °C to 70 °C) |
| Operating humidity | 5 % to 95 % non‑condensing |
Connect the AC adapter to the device’s power port, plug the adapter into a power outlet, then the device powers on and the LED status lights illuminate.
Connect a RJ‑45‑to‑DB‑9 console cable, set up a TFTP server on the same subnet, copy the firmware image to the server’s root folder, then use the CLI command `execute reboot` and follow the prompts to load the image from the TFTP server.
Log in to the web‑based manager, navigate to System > Maintenance > Backup & Restore, and select the option to restore factory defaults.