The Dell SE2416HM is a 24-inch monitor with a 1920 x 1080 resolution and an 8ms response time. It has VGA and DVI inputs and supports a refresh rate of up to 75Hz.
The Dell SE2416HM is a 23.8-inch (60.47 cm) active-matrix TFT LCD monitor with 1920 x 1080 resolution, VGA and DVI-D connectivity, Plug and Play support, an on-screen display menu, a security lock slot, an 8,000,000:1 dynamic contrast ratio, and an energy gauge.
This guide covers unpacking and package contents, identifying parts and controls, installation, cable management, stand removal, operation, OSD use, tilt adjustment, troubleshooting, automatic self-test, built-in diagnostics, common and product-specific problems, and monitor specifications. This manual is written in French.
| Visible display area | 60.47 cm (23.8 inches) |
|---|---|
| Resolution | 1920 x 1080 |
| Dynamic contrast ratio | 8,000,000:1 |
| Video inputs | VGA and DVI-D |
| Standby power | 0.3 W |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Storage temperature | -20°C to 60°C (-4°F to 140°F) |
| Operating humidity | 10% to 80% (non-condensing) |
| Storage humidity | 10% to 90% (non-condensing) |
| Operating altitude (maximum) | 5,000 m (16,400 ft) |
| Non-operating altitude (maximum) | 12,192 m (40,000 ft) |
| Thermal dissipation | 85.32 BTU/hour (typical) |
| Power consumption (normal operation) | 25 W maximum; 20 W typical |
| Power consumption (standby/off) | Less than 0.3 W |
| PON | 20 W |
| Total energy consumption (TEC) | 63.8 kWh |
The package includes the monitor, support column, base, power cord (varies by country), VGA cable, quick start guide, and regulatory and safety information.
Unplug the power cord first, then use a lightly dampened soft cloth; avoid benzene, thinner, ammonia, abrasive cleaners, and compressed air.
Yes. It automatically provides Extended Display Identification Data (EDID) to the computer through Display Data Channel (DDC) protocols.
Press a key or move the mouse to wake it; if there is still no display, press the monitor button to select the source, and turn on the computer and monitor to access the OSD.