The Dell™ PowerConnect™ 2216/2224/2324 Switches User's Guide describes the features and characteristics of the products.
This user's guide covers the Dell PowerConnect 2216, 2224 and 2324 switches, which provide 10/100-Mbps Gigabit or 10/100/1000-Mbps Gigabit Ethernet connectivity. The 2216 has 16 ports, the 2224 has 24 ports, and the 2324 has 24 ports plus two additional RJ-45 Gigabit Ethernet uplink ports. The guide describes the package contents, front panel LED indicators, and how to connect devices and cascade switches.
It also explains typical small and large workgroup deployments, tag-based IEEE 802.1p class-of-service prioritization, and step-by-step mounting kit instructions for installing the switch on a flat surface, in a 19-inch rack, or on a wall. A technical information section lists network protocol compatibility, power supply, physical dimensions and environmental specifications for each model.
| PowerConnect 2216 ports | 16 ports, 10/100-Mbps Gigabit |
|---|---|
| PowerConnect 2224 ports | 24 ports, 10/100-Mbps Gigabit |
| PowerConnect 2324 ports | 24 ports plus two RJ-45 Gigabit Ethernet uplink ports, 10/100/1000-Mbps |
| Standards compliance | IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3z/ab 1000Base-T, 802.3x flow control, 802.1p priority |
| MAC address entries | 8K supported |
| Chassis | 19-inch rackmountable and wallmountable, standard 1U, internal power supply |
| Power supply (2216) | 100-240 VAC, 50-60 Hz, 0.4A |
| Power supply (2224/2324) | 100-240 VAC, 50-60 Hz, 0.75A |
| Dimensions (2216) | 266 x 161 x 43 mm, 3.0 lbs |
| Dimensions (2224/2324) | 328 x 231 x 43 mm, 4.8 lbs (2224) / 5.1 lbs (2324) |
| Operating environment | 0° to 40°C, 10% to 90% non-condensing relative humidity |
Category 5E (CAT 5E) cabling should be used for connecting devices at 1000-Mbps Gigabit Ethernet speed.
No. Using multiple cables to connect switches can create a loop and cause collisions.
Allow at least 5.1 cm (2 inches) on each side and 12.7 cm (5 inches) at the back for power cable clearance.
The eight levels of IEEE 802.1p priority are mapped to two priority queues per port: priorities 0-3 to queue 0 with weight 1, and priorities 4-7 to queue 1 with weight 4, scheduled by Weighted Round Robin.