Dell OptiPlex 3030 All-in-One Owner's Manual
This owner's manual is for the Dell OptiPlex 3030 All-in-One (regulatory model W10B) and is written in Portuguese. It explains safety precautions, working inside the computer, recommended tools, shutdown steps, and component removal and installation procedures.
It also covers system setup options, BIOS updates, system and setup passwords, technical specifications, controls and lights, environmental requirements, and how to contact Dell.
| Camera image resolution | 0.92 megapixels |
|---|---|
| Camera video resolution | HD 720p @ 30 FPS |
| Camera diagonal viewing angle | 74 degrees |
| Stand tilt | -5 to 30 degrees |
| Width | 489.92 mm (19.29 in) |
| Height | 328.84 mm (12.95 in) without stand; 385.58 mm (15.18 in) with stand |
| Depth, non-touch | 67.62 mm (2.66 in) without stand; 204.58 mm (8.05 in) with stand |
| Depth, touch | 66.72 mm (2.63 in) without stand; 204.97 mm (8.07 in) with stand |
| Weight, non-touch | 4.18 to 4.37 kg (9.21 to 9.63 lb) without stand; 5.68 to 5.87 kg (12.52 to 12.94 lb) with stand |
| Weight, touch | 4.87 to 5.06 kg (10.74 to 11.15 lb) without stand; 6.37 to 6.56 kg (14.04 to 14.46 lb) with stand |
| Stand footprint | 200.00 x 200.00 mm (7.87 x 7.87 in) |
| Operating temperature | 5 to 35 C (41 to 95 F) |
| Storage temperature | -40 to 65 C (-40 to 149 F) |
| Operating humidity | 10% to 90% (non-condensing) |
| Storage humidity | 10% to 95% (non-condensing) |
| Operating vibration | 0.66 GRMS |
| Storage vibration | 1.30 GRMS |
| Operating shock | 110 G |
| Storage shock | 160 G |
| Operating altitude | -15.20 to 3048 m (-50 to 10,000 ft) |
| Storage altitude | -15.20 to 10668 m (-50 to 35,000 ft) |
| Air contamination level | G2 or lower per ANSI/ISA-S71.04-1985 |
| Power button light | White solid when on; white blinking in sleep mode |
| Hard drive activity light | White blinking when reading or writing data |
| Camera LED | White solid when the camera is on |
| Network link light | Green for 10/100 Mbps, orange for 1000 Mbps, off for no link |
| Network activity light | Yellow blinking when network activity is present |
| Power supply diagnostic light | Green when the power supply is on and functional |
Disconnect all power sources, shut down the computer, disconnect network cables, and ground yourself before touching internal parts.
A small flathead screwdriver, a Phillips screwdriver, and a plastic pointed instrument.
Save and close all open files, exit open programs, shut down the operating system, and hold the power button for about 6 seconds if it does not turn off automatically.
It indicates that the computer is in sleep mode.