CAP 3000 and CAP 3000 UC are turnstiles designed for use in access control systems for various types of businesses. They can be used with controllers, management software, RIFD technology readers or other readers compatible with the controller's communication standards. They can also be activated by buttons, intercoms, telephone exchanges, remote controls or any other triggering device with dry contact output.
This manual provides instructions for the installation, operation, and maintenance of the Intelbras CAP 3000 and CAP 3000 UC electronic turnstiles. These electromechanical access control devices are designed for use in various business environments and residential complexes, integrating with controllers and RFID readers. This manual is written in Portuguese.
| Power Supply | AC100 ~ 240 V |
|---|---|
| Operating Voltage | DC 24 V ±5% |
| Power Consumption | 30 W |
| Casing Material | Stainless Steel SAE 304 |
| Weight | 36 Kg |
| Arm Length | 510 mm |
| Rotation Direction | Unidirectional / Bidirectional |
| Operating Temperature | -30 °C ~ 60 °C |
| Humidity | 5% ~ 90% |
| Protection Rating | ≥IP31 |
| Coil Resistance | 37 ohms |
Yes, it can be controlled by any access controller via a dry contact.
In coastal areas with saline mist, the equipment should be cleaned at most every 7 days.
A preventive review should be conducted every 6 months.
No, the use of 125 kHz readers is not recommended as they may cause reading failures.