User manual for Intelbras gate inverter board with installation, operation, and programming instructions.
This document provides detailed instructions for installing, operating, and programming the Intelbras gate inverter board. It covers electrical connections, sensor setup, remote control programming, and configuration of auxiliary outputs. The board supports motors up to 1/2 hp and includes features like adjustable speed, acceleration/deceleration ramps, and compatibility with various control devices.
The manual includes step-by-step installation guides for motors, photo sensors, end-of-travel sensors, and auxiliary devices. It also explains operational states (rest, programming, opening, closing) and how to configure parameters using tactile buttons and LED indicators. This manual is written in Portuguese.
| Alimentação (Placa) | 127 V / 220 V |
|---|---|
| Alimentação (Motor) | 0 – 200 V |
| Frequência de operação | 50 Hz ou 60 Hz (Autoconfigurada) |
| Temperatura de operação | 0 °C...50 °C |
| Potência do motor (trifásico) | Até 1/2 cv |
| Potência do motor (monofásico 220 V) | Até 1/2 cv |
| Potência do motor (monofásico 127 V) | Até 1/3 cv |
| Frequência do controle | 433,92 MHz |
| Protocolo do controle | FSK – Criptografia AES 128 bits Intelbras OOK – Code Learning – Código aberto |
| Quantidade de controles | 800 botões |
| Tensão saída auxiliar | 12 Vcc / 300 mA |
| Dimensão (L × A × P) | 100 × 116 × 43 mm |
It can control motors up to 1/2 hp for three-phase motors and up to 1/2 hp for 220V single-phase motors, and up to 1/3 hp for 127V single-phase motors.
The operating temperature range is 0 °C to 50 °C.
Up to 800 buttons can be programmed.
The control signal frequency is 433.92 MHz.