The SG 800 Q+ is an 8-port Gigabit Ethernet switch that supports 10/100/1000 Mbps speeds and can be used to build data communication networks, connect computers, printers, VoIP devices (such as ATAs and IP phones), and provide Internet sharing for other devices connected to it (depending on the type of access and available broadband equipment).
The Intelbras SG 800 Q+ is an 8-port Gigabit Ethernet switch with 10/100/1000 Mbps RJ45 ports and auto-negotiation. It uses store-and-forward switching, has a 4K MAC address table, a 16 Gbps backplane, and supports IEEE802.1p QoS with four priority queues per port.
Installation requires at least 30 mm clearance around the switch, appropriate ventilation, and avoidance of nearby radio-frequency sources; it can be placed on a flat surface. The manual also covers LED indications, connector pinout, and warranty terms; data encryption is not available. This manual is written in Portuguese.
| Standards | IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3x (Flow Control), IEEE802.1p (Priority Queueing/QoS) |
|---|---|
| Ports | 8 RJ45 10/100/1000 Mbps with auto-negotiation |
| Auto MDI/MDI-X | Automatic detection of normal/crossover cable standard |
| Supported cabling | 10BASE-T: UTP category 3, 4 and 5 (max. 100 m); 100BASE-TX: UTP category 5, 5e (max. 100 m); 1000BASE-T: UTP category 5e, 6 (max. 100 m) |
| LED indicators | 8 Link/Act and 1 Power |
| Transfer method | Store-and-Forward |
| MAC address table | 4K |
| Forwarding rate | 10 Mbps: 14880 PPS; 100 Mbps: 148800 PPS; 1000 Mbps: 1488000 PPS |
| Backplane | 16 Gbps |
| Memory buffer | 192 kB |
| QoS | IEEE802.1p prioritization; four priority queues per port; SP queue algorithm |
| Power supply | Input: 100-240 Vac / 50-60 Hz; output: 9 Vdc / 0.6 A |
| Maximum power consumption | 4 W |
| Operating temperature | 0 °C to 40 °C |
| Storage temperature | -40 °C to 70 °C |
| Operating humidity | 10% to 90% non-condensing |
| Storage humidity | 5% to 90% non-condensing |
| Dimensions (W x H x D) | 142 x 24 x 90 mm |
| Certifications | Anatel |
| Data encryption | Not available |
It has 8 RJ45 Gigabit Ethernet ports with auto-negotiation.
Input is 100-240 Vac / 50-60 Hz and output is 9 Vdc / 0.6 A.
Yes, it supports IEEE802.1p prioritization with four priority queues per port and an SP queue algorithm.
The warranty is 2 years: 3 months legal plus 21 months contractual, counted from the purchase date.