IOTRDA R24SM1B Sleep Detection Radar Specification

The IOTRDA R24SM1B Sleep Detection Radar is a radar detection module based on millimeter-wave Doppler radar technology that realizes human breathing perception and human motion perception. The module adopts an enhanced Doppler radar signal processing system, and through the synchronous perception technology of human motion Doppler parameters and human breathing parameters, it realizes wireless perception of the sleep state of personnel in a specific place.


IOTRDA R24SM1B Sleep Detection Radar Specification - cover page
Brand
IOTRDA
Category
sensor
Document type
Datasheet
Language
Chinese
Pages
16
File format
PDF
File size
1.9 MB
Published
17 November, 2023
Updated
17 November, 2023
MD5 checksum
E17C1D55C6590B17D187A9A2D7C11592

About this manual

The IOTRDA R24SM1B is a 24GHz Doppler radar sensor module designed for sleep monitoring and vital sign detection. It uses enhanced Doppler radar technology to perceive human presence, breathing rate, and motion within a two-dimensional area. The module outputs breathing parameters, motion parameters, and scene state assessments via a UART interface. This manual is written in Chinese.

What's inside

  • 概述
  • 电气参数
  • 模块尺寸及引脚说明
  • 模块工作模式
  • 典型应用模式
  • 模块接口协议
  • 注意事项
  • 常见问题
  • 免责声明
  • 版权说明

Specifications

Operating frequency24.1 GHz (24.0–24.25 GHz)
Transmit power8 dBm typical (6 dBm min)
Breathing detection max distance2 m typical (1.5 m min)
Motion detection max distance5 m typical (4–6 m)
Horizontal detection angle90–110°
Pitch detection angle30–40°
Operating voltage5.0 V typical (4.5–6 V)
Operating current93 mA typical (90–100 mA)
Operating temperature-20 to +60 °C
Storage temperature-40 to +80 °C
Module dimensions≤35×30×5 mm
Interface connector2.0 mm pitch dual-row header
UART configurationTTL, 9600 baud, 8 data bits, 1 stop bit, no parity

Frequently asked questions

What is the maximum breathing detection distance of the R24SM1B?

The maximum breathing detection distance is 2 meters typical (1.5 meters minimum).

What are the two installation modes supported by the radar module?

The module supports ceiling-mounted installation (1–2m above bed) and tilted bedside installation (0.5–1.5m height, 10–30° downward tilt).

What serial communication parameters does the module use?

The module uses TTL level UART at 9600 baud with 8 data bits, 1 stop bit, and no parity.

Download PDF (1.9 MB)