PCI-R5001 series face recognition terminal adopts the world's first-class industrial design standards, pursuing the ultimate quality, with the characteristics of fast face recognition speed, high accuracy, anti-counterfeiting and flexible expansion. It can be used in face access control, employee attendance, face payment, entrance and exit identity inspection and other application scenarios, making customers' access and management more efficient and intelligent.
This is the Chinese installation and user manual for the PCI-R5001 Series face recognition terminal, described in the document as a 5-inch-screen face recognition terminal developed by 佳都科技 (PCI). The manual is marked V1.0.0, first created on 2021.03.04, and is intended for installing and operating the terminal.
The manual introduces the product and its appearance, hardware interfaces and typical access-control network architectures. It then gives wall-mount and turnstile installation procedures with dimension drawings, device wiring for models with an access-control expansion module, and operating instructions: startup, date and time setting, face, card, card-plus-face, card-plus-password, password and remote door-opening modes, personnel library and recognition records, algorithm parameters, device interfaces (Wiegand, RS232, IO), network configuration and access-control settings. It ends with face-enrollment standards, troubleshooting and safety precautions. This manual is written in Chinese.
| Display size | 5 inches |
|---|---|
| Input power supply | Wide-voltage power supply, 9-24V |
| Power wiring | 1.0 mm² 2-core wire; use 24V supply if the power line exceeds 8 m |
| Recommended installation height | 1.4 m |
The terminal supports a wide-voltage power supply with a range of 9-24V; if the power line is longer than 8 m, a 24V supply should be used.
The manual recommends an installation height of 1.4 m, which can be adjusted to the actual situation.
Check whether the power supply polarity is reversed and whether the input voltage is insufficient, then verify the power module output and the power wiring.
Check for遮挡 or the face being outside the recognition area, verify the system time, and make sure the algorithm threshold is not set too high — the recommended threshold value should be used.