This document describes the features and specifications of the VIP E2100 VIP E4120 VIP E2100 VIP E4120 IP cameras.
This Portuguese user manual covers the Intelbras VIP E2100 and VIP E4120 IP cameras. It presents technical specifications, product dimensions, rear and internal connector details, installation and cabling instructions, and the requirements for accessing the camera through a web interface.
The manual then explains live view, PTZ control, camera and network configuration, event management, storage, system settings, alarm connections, logout, and frequently asked questions. Alarm input/output wiring and reset button behavior are described for both models. This manual is written in Portuguese.
| Image sensor | 1/3” Aptina CMOS |
|---|---|
| Video compression | H.264 / H.264B / MJPEG |
| Image resolution | 1.3 MP (1280x960) and 720p (1280x720) |
| Lens focal length | 2.8 to 12 mm |
| Maximum IR distance | 20 m |
| Power supply (VIP E2100) | 12 VDC/24 VAC and PoE (IEEE 802.3af) |
| Power supply (VIP E4120) | 12 VDC and PoE (IEEE 802.3af) |
| Power consumption | Maximum 6 W |
| Operating temperature | -10 °C to +60 °C |
| Network interface | RJ45 10/100BASE-T |
Check that the camera and PC connections are correct, and verify the camera IP address and network cable.
Check that the IP camera is connected to the same physical network as your PC.
Verify that the camera is using the default HTTP port, 80.
It restores the camera to the factory configuration.