This is an engineer's manual, mainly for technical personnel responsible for machine maintenance and保养.
This Engineer's Manual is written for technical personnel responsible for the service and maintenance of the JUKI SC-510 control box and M51 servo motor. It covers standard adjustment, adjustment procedures, results of improper adjustment and other service information that is not included in the Instruction Manual; JUKI advises using it together with the Instruction Manuals and Parts Lists for SC-510/M51, IP-100E/SC-510 and CP-160C.
The manual gives specifications, configuration and the optional control panels CP-160 and IP-100E, the arrangement and function settings of the SC-510 control box, the procedure for changing the pedal type, connection of JUKI optional devices, external input/output signal connectors, the simplified program function, connector connection diagrams, maintenance such as fuse replacement and voltage changeover, error codes, a block diagram and an input/output chart.
| Supply voltage | Single phase 100 to 120V, 3-phase 200 to 240V, single phase 200 to 240V |
|---|---|
| Frequency | 50Hz/60Hz |
| Operating temperature range | 0 to 40°C |
| Operating humidity range | 90% or less |
| Power consumption | 425VA |
| Number of input ports | 8 |
| Number of output ports | 8 |
| Number of programs | 4 |
| Number of steps | 20 steps per program |
| Motor | M51 high-torque servo motor, 750 W output |
It supports single phase 100 to 120V, 3-phase 200 to 240V and single phase 200 to 240V, at 50Hz/60Hz.
The power cord up to the power switch is replaced and the voltage changeover connector inside the control box is set.
A high-torque servo motor M51 with 750 W output is employed.
The machine has 4 programs, with 20 steps per program.